Threaded End
Wednesday, December 31st, 2008
How can you put a threaded end of the cable TV coax?
I have a cable across the floor for cable in the room, but needs the threaded end on it that someone knows where I can find a way to save end? With images, if possible
Go get one at Radio Shack. There are instructions on the package to know how to put it. Basically, you need to do is slide the nut and the ring connector on the cable, then cut some of the outer insulation. Fold the outer conductor, the braided shielding back on the neck. Then cut the inner insulation of the central conductor. Wil this be part enters the female side connector mooring to the rear of the TV, so make sure that enough excess. If necessary, trim the outer insulation a little more, so it is big enough to work. Drag the coating of the cable outside the open internal nut and screw on the rear connector. The nut should hold the braided shield (outer conductor) securely to the outer shell of the connector. The inner conductor should be stressed enough to make contact when you join the two mating connectors. Good luck!
|
|
4G Steel Tunnels with Threaded End Plugs Earrings PAIR
$8.99 |
|
|
1" Black Titanium Tunnel w/ Gem Threaded End Plug PAIR
$29.99 |
|
|
6G Steel Tunnel Gems Studded &Threaded End Plugs PAIR
$11.99 |
|
|
2G Steel Tunnels with Threaded End Plug Earrings PAIR
$8.99 |
|
|
00G Steel Tunnels with Threaded End Earrings PAIR
$10.49 |
|
|
0G Steel Tunnels with Threaded End Earrings Plugs PAIR
$10.49 |
|
|
2G Black Titanium Tunnel w/ Gem Threaded End Plugs PAIR
$14.99 |
|
|
Drop Head 1/2 Inch Drain Cable Threaded End
$11.85 |
|
|
Weatherhead Rubber Hose with Threaded End Connectors
$7.99 |
|
|
Lot of 4 Female Threaded 16 mm Rod End Link Heim Joints
$29.95 |
|
|
OTC 7703 PULLER SLIDE HAMMER 10LB 5/8-18 THREADED END
$90.99 |
|
|
5Set 925 SS Chain Screw Threaded Point and End Tip Caps
$10.99 |
|
|
1Set 925 SS Chain Screw Threaded Point and End Tip Caps
$2.99 |
|
|
Silver Threaded/Screw End Cap BANGLE fit European Charm
$8.07 |
|
|
HD HARLEY KURYAKYN THREADED STIRRUP END MALE MOUNT NEW
$18.99 |
|
|
6G Steel Tunnels with Threaded End Earrings Plugs PAIR
$8.99 |
|
|
3/8" Steel Tunnels with Threaded End Earrings Plug PAIR
$10.49 |
|
|
1" Steel Tunnels with Threaded End Plugs Earrings PAIR
$14.99 |
|
|
prop end suit 1/4 cable threaded 142mm long solder type
$8.97 |
|
|
RC Boat prop end 3/16" threaded type
$7.17 |
|
|
1" Steel Tunnels with Threaded End Plugs Earrings PAIR
$14.99 |
|
|
3/8" Steel Tunnels with Threaded End Earrings Plug PAIR
$10.49 |
|
|
6G Steel Tunnels with Threaded End Earrings Plugs PAIR
$8.99 |
|
|
6G Black Titanium Tunnel Plug w/ Gem Threaded End PAIR
$14.99 |
|
|
7/16" Black Titanium Tunnel Gem Threaded End Plugs PAIR
$22.49 |
|
|
Nil-Cor 3 Piece Threaded End Ball Valve 510 Series ¾in
$19.99 |
|
|
OTC 1156 PULLER SLIDE HAMMER 2-1/2LB WITH THREADED END
$52.99 |
|
|
Nibco 1/4" D Ball Valve threaded end
$0.99 |
|
|
Stainless Steel Tube Assembly w/Threaded End Connectors
$16.99 |
|
|
100 SP Threaded Snake Chain End Tips Caps 7.2x4.2mm
$1.79 |
|
|
1Set 925 SS Chain Screw Threaded Point and End Tip Caps
$0.89 |
|
|
1" Black Titanium Tunnel w/ Gem Threaded End Plug PAIR
$29.99 |
|
|
4G Steel Tunnels with Threaded End Plugs Earrings PAIR
$8.99 |
|
|
Attwood SL70-BS-1 1" Threaded Stud 10 mm Ball End NEW
$4.99 |
|
|
Rod End 1 1/4" -12 Threaded (1.25") Rigging Shackle
$25.00 |
|
|
Isolated Threaded Rod End 1 1/4" -12 (1.25") Shackle
$30.00 |
|
|
Dixon RST5 NPT Threaded End King Combination Nipple .75
$4.00 |
|
|
6G Steel Tunnel Gems Studded &Threaded End Plugs PAIR
$11.99 |
|
|
2G Steel Tunnels with Threaded End Plug Earrings PAIR
$8.99 |
|
|
00G Steel Tunnels with Threaded End Earrings PAIR
$10.49 |
|
|
0G Steel Tunnels with Threaded End Earrings Plugs PAIR
$10.49 |
|
|
2G Black Titanium Tunnel w/ Gem Threaded End Plugs PAIR
$14.99 |
|
|
#113 FORD AIR TUBE- CROSSOVER W/THREADED STUB END
$46.30 |
|
|
5- NEW AN490-8 Unplated Steel Aircraft Threaded Rod End
$7.50 |
|
|
OTC 1155 PULLER SLIDE HAMMER 5LB WITH THREADED END
$59.99 |
|
|
7/16" Black Titanium Tunnel Gem Threaded End Plugs PAIR
$22.49 |
|
|
6G Black Titanium Tunnel Plug w/ Gem Threaded End PAIR
$14.99 |
|
|
6G Steel Tunnel Gems Studded &Threaded End Plugs PAIR
$11.99 |
|
|
Lot 4 Male 6 mm Rod End Link Heim Joints Threaded Joint
$19.95 |
|
|
316-NM UNC STAINLESS STEEL THREADED YOKE END 1/2"
$49.20 |
|
|
316-NM UNC STAINLESS STEEL THREADED YOKE END 1/4"
$18.77 |
|
|
316-NM UNC STAINLESS STEEL THREADED YOKE END 3/16"
$16.38 |
|
|
316-NM UNC STAINLESS STEEL THREADED YOKE END 3/4"
$120.39 |
|
|
316-NM UNC STAINLESS STEEL THREADED YOKE END 3/8"
$30.92 |
|
|
316-NM UNC STAINLESS STEEL THREADED YOKE END 5/16"
$22.57 |
|
|
316-NM UNC STAINLESS STEEL THREADED YOKE END 5/8"
$82.85 |
|
|
8" LONG SOLID BRASS LAMP PIPE THREADED 1/8 IP EACH END
$5.40 |
|
|
Circle Track Drag Racing Threaded Tubing End RH 5/8"-18
$10.99 |
|
|
Circle Track Drag Racing Threaded Tubing End LH 5/8"-18
$10.99 |
|
|
Circle Track Drag Racing Threaded Tubing End RH 3/4"-16
$14.99 |
|
|
Circle Track Drag Racing Threaded Tubing End LH 3/4"-16
$14.99 |
|
|
3H03 STEEL POINT, 14MM X 100MM +/-, THREADED ON END GC
$4.00 |
|
|
2" PBV Oilpatch Threaded End Swing Check Valves 2Pcs
$100.00 |
|
|
LOT OF 11 THREADED TUBE END VG-552-58 BRASS INSERT NR
$3.97 |
|
|
4 Female 6mm Threaded Rod End Tie Bearings Link Joint
$22.95 |
|
|
4 Male 16mm Threaded Rod End Tie Bearings Link Joint
$35.95 |
|
|
4 Male Threaded Rod End Tie Bearings Link Joint 16mm
$29.95 |
|
|
4 Female Threaded Rod End Tie Bearings Link Joint 12mm
$19.95 |
|
|
4 Male Threaded Rod End Tie Bearings Link Joint 25mm
$69.95 |
|
|
4 PNEUMATIC AIR THREADED CONNECTOR END BLOCK 1/4-NPT
$24.99 |
|
|
1Set 925 SS Chain Screw Threaded Point and End Tip Caps
$2.70 |
|
|
97-02 SUZUKI KING QUAD TIE ROD / THREADED END
$14.95 |
|
|
1Set 925 SS Chain Screw Threaded Point and End Tip Caps
$5.99 |
|
|
4 NOS Phillips ECG6003 ECG 6003 Component, Threaded End
$19.95 |
|
|
8020 Quick Frame 3/8-16 Threaded End Bracket 9351 N
$1.35 |
|
|
4" Hydraulic Cylinder 3/8" threaded shaft each end.
$140.00 |
|
|
1-1/4" SWING CHECK VALVE 200 WOG BRASS THREADED END NEW
$24.99 |
|
|
4 Male 14mm Threaded Rod End Tie Bearings Link Joint
$30.95 |
|
|
4 Female 16mm Threaded Rod End Tie Bearings Link Joint
$40.95 |
|
|
4 Male 12mm Threaded Rod End Tie Bearings Link Joint
$24.95 |
|
|
4 Male 6mm Threaded Rod End Tie Bearings Link Joint
$22.95 |
|
|
4 Female Threaded Rod End Tie Bearings Link Joint 14mm
$30.95 |
|
|
4 Female Threaded Rod End Tie Bearings Link Joint 8mm
$23.95 |
|
|
4 Male Threaded Rod End Tie Bearings Link Joint 6mm
$22.95 |
|
|
4 Male Threaded Rod End Tie Bearings Link Joint 10mm
$23.95 |
|
|
4 Male 8mm Threaded Rod End Tie Bearings Link Joint
$22.95 |
|
|
4 Female 14mm Threaded Rod End Tie Bearings Link Joint
$30.95 |
|
|
4 Male Threaded Rod End Tie Bearings Link Joint 12mm
$24.95 |
|
|
4 Female Threaded Rod End Tie Bearings Link Joint 10mm
$23.95 |
|
|
3" 3IN. PVC BALL VALVE 150PSI THREADED END
$80.00 |
|
|
2-1/2 lb Slide Hammer Puller with Threaded End OTC1156
$59.19 |
|
|
500 Threaded Snake Chain End Tips Caps 7.2x4.2mm
$18.93 |
|
|
100 Threaded Snake Chain End Tips Caps 7.2x4.2mm
$3.60 |
|
|
500 SP Threaded Snake Chain End Tips Caps 7.2x4.2mm
$18.93 |
|
|
100 SP Threaded Snake Chain End Tips Caps 7.2x4.2mm
$3.60 |
|
|
Lot of Threaded end pieces for filler or pencils
$49.99 |
|
|
(NEW) (Lot of 2) UNIQUE FIRE STOP 4" End Cap Threaded
$24.99 |
|
|
psa05r-050 threaded end A/C Adapter (5V 1A) + plug
$8.17 |
|
|
NIBCO T29 3/4" BRONZE THREADED END GATE VALVE 79875
$4.00 |
|
|
6" LONG SOLID BRASS LAMP PIPE THREADED 1/8 IP EACH END
$5.50 |
|
Gilmour Group 960BGT Green Thumb Poly Pistol Nozzle W/threaded Front (Pack of 45)
$39.30 "GREEN THUMB" POLY PISTOL NOZZLE * Poly pistol nozzle with threaded front. * Adjustable spray pattern. * Polymer valve assembly with fixed nut. * Molded grip for cushioned comfort. * Hold open clip for continuous spraying. * Display box. * Bulk.... |
|
Fiberglass Broom Handle, Nylon Plastic Threaded End, 1 Dia. x 60 Long, Black
$6.79 UNS636 Super tough nylon plastic standard threaded end. Fiberglass handle is mesh-veiled to prevent splintering. Fiberglass with nylon end Global Product Type: Mop and Broom Handles; Handle Material: Fiberglass; Coating: N/A; Handle Length: 60 in.PRODUCT DETAILS: -Handle Material: Fiberglass. -Quantity : 1 each. -Global Product Type: Mop and Broom Handles. -Post-Consumer Recycled Content Percent ... |
|
Threaded End Broom Handle - 60
Threaded End Broom Handle - 54" Natural lacquered wood handle. Standard thread. 15/16" dia. 60" long overall.... |
|
Fiberglass Mop Handle with Plastic Threaded End, 60 Length
$20.72 Super-tough black nylon plastic standard threaded end. Black fiberglass handle is mesh-veiled to prevent splintering. 1" diameter.... |
|
Marshalltown 15539 1-3/4-Inch Female End to Push Button Adapter
$13.78 ... |
|
AO Smith Motor Thru Bolts 10-32 x 12 Long x 2 Threaded End 16285680
$2.95 ... |
|
Smith Victor 580 Brass Adapter with 1/4 & 3/8 Male & Female Ends, 3 Long.
$5.50 The Smith Victor Brass Adapter, 1/4 and 3/8 Female has a total length of 3 inches.... |
|
4-40 End Threaded Rods (10)
$6.01 These are 4-40 size steel rods that are threaded on both ends. There are 10 per package.... |
|
Du-Bro 302 4-40 Threaded Rod End (2-Pack)
$3.73 Perfect for many 1/4 scale applications, including strut attachments, flying wires, tailfin stab bracing, and bi-plane aileron connectors. Heavy duty steel and nickel plated. Includes screws and hex nuts. For use with .093 diameter (4-40) threaded rods.... |
|
2-56 Threaded Rods Double End (8)
$4.13 Sullivan's 2-56 Assorted Double End Thread Rods... |